2011 dodge journey 2.4 belt diagram

Dodge Journey 2.4 Serpentine Belt Diagram

Looking for a reliable and efficient vehicle that can take you on all your adventures? The Dodge Journey 2.4 is a versatile and spacious SUV that’s perfect for families, road trips, and daily commutes. One important component of the Dodge Journey’s engine is the serpentine belt, which plays a crucial role in powering various engine components. Understanding the serpentine belt diagram is essential for maintaining and repairing your Dodge Journey, so let’s take a closer look at this important aspect of your vehicle’s engine system.

2015 Dodge Journey 2.4 Serpentine Belt Diagram

If you’re looking for a 2015 Dodge Journey 2.4 serpentine belt diagram, you’ve come to the right place. The serpentine belt plays a crucial role in the functioning of your vehicle’s engine, powering essential components like the alternator, power steering pump, and air conditioning compressor. A clear and accurate diagram is essential for proper installation and maintenance of the serpentine belt. By following the diagram, you can ensure that the belt is routed correctly and at the appropriate tension, ultimately contributing to the smooth operation of your Dodge Journey. Whether you’re a DIY enthusiast or a professional mechanic, having access to the correct serpentine belt diagram is essential for keeping your vehicle running smoothly.

abrieliaasrokah.blogspot.com

2013 Dodge Journey Belt Diagram

The 2013 Dodge Journey 2.4 serpentine belt diagram is an essential reference for DIY car maintenance. This diagram illustrates the routing of the belt around various pulleys, guiding the proper installation and tensioning of the serpentine belt. By following the belt diagram, car owners can ensure that the belt is correctly positioned, preventing slippage and potential damage to the engine components. Understanding and utilizing the belt diagram is crucial for maintaining the optimal performance and longevity of the Dodge Journey’s engine.

diagramwiringschema.blogspot.com

2010 Dodge Journey Belt. Accessory Drive, Serpentine

If you’re looking for information about the 2010 Dodge Journey’s accessory drive and serpentine belt, you’ve come to the right place. The accessory drive system in the Dodge Journey 2.4L engine is powered by a serpentine belt, which is responsible for driving multiple components such as the alternator, power steering pump, and air conditioning compressor. Understanding the serpentine belt diagram for the Dodge Journey 2.4L engine is crucial for proper maintenance and troubleshooting. By following the correct belt routing, tensioning, and inspection procedures, you can ensure the smooth operation of the accessory drive system in your Dodge Journey. If you’re in need of a visual guide, the serpentine belt diagram for the 2010 Dodge Journey can be a helpful resource.

www.moparpartsinc.com

Dodge Nitro Drive Belt. Serpentine Belt. Routing:crk, Idler, Tens, Comp

If you’re looking for information on the Dodge Journey 2.4 serpentine belt diagram, understanding the routing of the drive belt is essential. The serpentine belt, also known as the drive belt, plays a crucial role in powering various components of the engine, including the crankshaft, idler pulley, tensioner, and compressor. Proper routing of the drive belt ensures that these components function efficiently, allowing your Dodge Nitro to operate smoothly. Understanding the correct routing of the drive belt is important for maintenance and replacement, so be sure to consult the serpentine belt diagram to ensure proper installation and functionality of your Dodge Journey 2.4’s drive belt.

www.lindsaychryslerparts.com

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

CarParts.com will be back soon!

We apologize for the inconvenience. The CP Team is working on some upgrades to improve our service. Thank you for using CarParts.com!

You can call us at

1-866-529-0412

Reference ID: 18.3e85655f.1725645322.1175f35d

Dodge Journey: Belt, serpentine

Description

• - POWER STEERING PUMP
• - ACCESSORY DRIVE BELT
• - GENERATOR
• - CRANKSHAFT PULLEY
• - LOWER IDLER PULLEY
• - WATER PUMP PULLEY
• - ACCESSORY DRIVE BELT TENSIONER
• - UPPER IDLER PULLEY

The accessory drive belt is a Poly-V type belt. On the 2.4L engine, the accessory drive belt drives the generator, P/S pump and air conditioning compressor.

• - IDLER/TENSIONER

On the 2.7L engine, the accessory drive belt drives the generator, and air conditioning compressor. The P/S is driven by a separate, stretch to fit drive belt.

• - IDLER PULLEY
• - P/S PUMP PULLEY
• - A/C COMPRESSOR PULLEY
• - GENERATOR PULLEY

On the 3.5L, the accessory drive belt drives the generator, P/S pump, and A/C compressor.

• - P/S PULLEY
• - A/C COMPRESSOR

The 2.0L Diesel engine accessory drive belt drives the P/S pump, Generator, and A/C compressor. Belt tension is maintained by an automatic accessory drive belt tensioner.

Diagnosis and Testing

ACCESSORY DRIVE BELTS

Satisfactory performance of the belt driven accessories depends on belt condition and proper belt tension.

ACCESSORY DRIVE BELT DIAGNOSIS

2.4L ENGINE

1. Using a wrench, rotate accessory drive belt tensioner (8) counterclockwise until accessory drive belt (2) can be removed from pulleys (5 and 9).

2. Remove accessory drive belt (2).

2.7L ENGINE

• - A/C PULLEY

1. Raise vehicle on hoist.

2. Remove RH wheelhouse splash shield.

3. Rotate accessory drive belt tensioner (5) clockwise to allow enough slack to remove accessory drive belt (3).

3.5L ENGINE

2. Remove RH wheelhouse splash shield. 3. Rotate accessory drive belt tensioner (3) clockwise to allow enough slack to remove accessory drive belt (5).

2.0L DIESEL ENGINE

1. Disconnect negative battery cable.

3. Working through wheelhouse, using a suitable wrench, rotate accessory drive belt tensioner (6) counterclockwise.

4. Remove accessory drive belt (7).

Clean all foreign debris from belt pulley grooves. The belt pulleys must be free of oil, grease, and coolants before installing the drive belt.

• - NORMAL CRACKS - BELT OK
• - NOT NORMAL CRACKS - REPLACE BELT

Belt replacement under any or all of the following conditions is required:

• Excessive wear
• Frayed cords
• Severe glazing

Poly-V Belt system may develop minor cracks across the ribbed side (due to reverse bending). These minor cracks are considered normal and acceptable. Parallel cracks are not .

NOTE: Do not use any type of belt dressing or restorer on Poly-V Belts.

Installation

NOTE: When installing drive belt on the pulleys, make sure that belt is properly routed and all V-grooves make proper contact with pulley grooves.

1. Install the accessory drive belt (2) around all the pulleys except for the generator pulley (3).

2. Using a wrench, rotate accessory drive belt tensioner (8) counterclockwise until accessory drive belt (2) can be installed on the generator pulley (3). Release spring tension onto accessory drive belt (2).

NOTE: When installing drive belt onto pulleys, make sure that belt is properly routed and all V-grooves make proper contact with pulley.

1. Position accessory drive belt (3) on all pulleys except generator (1).

2. Rotate accessory drive belt tensioner (5) clockwise.

3. Position accessory drive belt (3) on generator pulley (1).

4. Slowly release accessory drive belt tensioner (5).

5. Install RH wheelhouse splash shield.

6. Lower vehicle.

1. Position accessory drive belt (5) on all pulleys except generator (6).

2. Rotate accessory drive belt tensioner (3) clockwise.

3. Position accessory drive belt (5) on generator pulley (6).

4. Slowly release accessory drive belt tensioner (3).

1. Route accessory drive belt (7) around all pulleys except accessory drive belt tensioner (6). Rotate the tensioner arm (6) until it contacts it's stop position. Route the belt (7) around the idler (3) and slowly let the tensioner (6) rotate into the belt. Make sure the belt (7) is seated onto all pulleys.

2. Working through RH wheelhouse, using suitable wrench, rotate accessory drive belt tensioner (6) counterclockwise.

3. Position accessory drive belt (7).

4. Slowly release accessory drive belt tensioner (6) against accessory drive belt (7).

Accessory drive

Belt, serpentine, power steering.

ELECTRICAL POWER OUTLETS There are two fused 12 Volt (13 Amp) power outlets located in the center console below the radio. The power outlet on the top has power available when the ignition switch in the ON or ACC position. ...

Curb height measurement The wheel alignment is to be checked and all alignment adjustments made with the vehicle at its required curb height specification. Vehicle height is to be checked with the vehicle on a flat, le ...

TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steer ...

Dodge Journey Owners Manual

• Things to know before starting your vehicle
• Understanding the features of your vehicle
• Understanding your instrument panel
• Starting and operating
• What to do in emergencies
• Maintaining your vehicle
• Maintenance schedules
• If you need consumer assistance

Dodge Journey Service Manual

• Accessories and Equipment
• Differential and Driveline
• Heating & Air Conditioning
• Front Suspension
• Transmission

• VBG Catalog
• Order Status
• Commercial Application
• Contact V-Belt Guys 1-800-213-9715
• [ 3L ] - [ 3/8" ]
• [ A / 4L ] - [ 1/2" ]
• [ B / 5L ] - [ 21/32" ]
• [ C ] - [ 7/8" ]
• [ D ] - [ 1 1/4" ]
• [ A ] - [ 1/2" ]
• [ B ] - [ 21/32" ]
• Aramid V-Belts
• Aramid Banded V-Belts
• [ AA ] - [ 1/2" ]
• [ BB ] - [ 5/8" ]
• [ CC ] - [ 7/8" ]
• [ Poly V ] - [ L ]
• [ Poly V ] - [ M ]
• [ Poly V ] - [ K ]
• [ Poly V ] - [ J ]
• [ AX ] - [ 1/2" ]
• [ BX ] - [ 21/32" ]
• [ CX ] - [ 7/8" ]
• [ 3V ] - [ 3/8" ]
• [ 5V ] - [ 5/8" ]
• [ 8V ] - [ 1" ]
• [ 3VX ] - [ 3/8" ]
• [ 5VX ] - [ 5/8" ]
• [ 8VX ] - [ 1" ]
• [ 15 Section ] - [15/32"]
• [ 17 Section ] - [17/32"]
• [ 22 Section ] - [22/32"]
• [ 24 Section ] - [3/4"]
• [ 28 Section ] - [28/32"]
• [ XPA ] - [ 13mm ]
• [ XPB ] - [ 17mm ]
• [ XPC ] - [ 22mm ]
• [ XPZ ] - [ 10mm ]
• [ SPA ] - [ 13mm ]
• [ SPB ] - [ 17mm ]
• [ SPC ] - [ 22mm ]
• [ SPZ ] - [ 10mm ]
• Variable Speed Belts
• OEM Equivalent Replacement (OER) Belts
• Create account

Flat Rate Shipping $6.99 within the US!

2010 DODGE JOURNEY Replacement Belt | 2.4L Engine: SERPENTINE

• Description

2010 DODGE JOURNEY Replacement Belt

Share this Product

More from this collection.

00-403-015 KONGSKILDE GRAIN VAC Classic Replacement V-Belt

$ 6.44 $ 10.30

00-403-018 KONGSKILDE GRAIN VAC Classic Replacement V-Belt

$ 4.69 $ 7.50

000-6694 BEFCO Replacement Belt

$ 12.29 $ 16.04

00050441P Cub Cadet Aramid Wrapped V-Belt Replacement

$ 16.64 $ 19.79

• Forum Listing
• Marketplace
• Advanced Search
• Dodge Dart Garage - The Mopar Zone
• Dodge Dart 2.4L Tigershark

2.4L serpentine belt replacement

• Add to quote

Does anyone have a video or how-to? I'm surprised I couldn't find one on youtube. I'm sure it's not too hard to figure it out but I don't want to reinvent the wheel. Thanks  

dgdart said: Does anyone have a video or how-to? I'm surprised I couldn't find one on youtube. I'm sure it's not too hard to figure it out but I don't want to reinvent the wheel. Thanks Click to expand...

Thanks, I don't need the belt routing, I can just look at it. More interested in knowing in advance what's involved in getting the belt in and out. Does the engine mount need to come out? Can it be done from the top or do I need to go through the wheelwell? Also, are the idler and tensioner pulleys normally replaced with the belt or are they good for the long run?  

That question might be answered in the link I provided. The process should just be to use socket and loosen then tension pulley and pull it off. Unless you suspect any pulleys failing, then they should be good. I believe you will need to do it from the wheel well to access all the locations for belt routing. Take it off the crank pulley first, and then everything else should slide back off. Just like most serpentine belts, it can be a royal pain to get back on.  

I needed to replace my belt at 136,500+ miles. There was a split right in the middle. This simple job was a pain especially while it's cold outside. I ended up doing it from the bottom with no ramps or jack. I had a hole already in my bumper with the splash shield missing which made access easy. I ended up having to route the belt like normal then slip on #7 last while holding down the tensioner as far down as possible. I had issues with trying to hold it down while slipping the rest of the belt on as it's easy for the offset wrench to slip which ruins your progress. I wish they would have a lock or toggle of some sort to keep it in place without having to hold it down. It took me a couple hours of trying.  

• ?            
• 31.3K members

Top Contributors this Month

Serpentine Belt Diagram

Diagrams by maker, 2009 dodge journey serpentine belt diagram for 4 cylinder 2.4 liter engine, serpentine belt diagram for 2009 dodge journey.

Posted by admin on January 27, 2015

https://www.serpentinebeltdiagram.com/serpentine-belt-diagram-2009-dodge-journey-4-cylinder-24-liter-engine-02324/

Recent Posts

• 2000 WORKHORSE P Series Chassis Serpentine Belt Diagram for V8 7.4 Liter Engine
• 2000 WORKHORSE P Series Chassis Serpentine Belt Diagram for V8 6.5 Liter Engine Diesel
• 2000 WORKHORSE P Series Chassis Serpentine Belt Diagram for V8 5.7 Liter Engine
• Development Blog
• Documentation
• DreamHost Blog
• Suggest Ideas
• Support Forum
• WordPress Planet